2006 Yamaha Fz1

This is the maintenance schedule and associated service intervals for the second generation FZ1, made between 2006 and 2015, replacing the earlier carburettor-fed 1st gen FZ1 made between 2001 and 2005.

The second-generation Yamaha FZ1 was made between 2006 and 2015. It uses a fuel-injected engine from the 2004-2006 Yamaha R1. But even though the FZ1 was made through to 2015, it didn't get the 2009 Yamaha R1's crossplane crankshaft until the FZ-10/MT-10 of 2016 onward.

The Yamaha FZ1 2nd gen was also known as the FZ1 Fazer, FZ1-S Fazer, or FZ-1N when it was sold without a fairing (outside the US), the "N" being for "Naked". Obviously, maintenance for these motorcycles is all the same, as it was just the name that changed.

Yamaha made some updates to the second generation FZ1 during its lifetime, including

Some suspension upgrades
Updated fuelling to remove throttle snatch, and to improve low-to-mid RPM response
Various colour options

The fundamentals of the Yamaha FZ1 2nd gen — the engine, the brakes, and suspension — didn't change.

The FZ1 2nd gen was replaced by the Yamaha FZ-10 / MT-10 from 2016 with that sweet crossplane crank engine.

This site has links for things like oil and spark plugs from which we earn a commission (which unfortunately nobody can save, not even us). If you appreciate this work, then please use those links. Thanks!

What you need to maintain the Yamaha FZ1

It's a chain driven naked (or semi-naked) 4-cylinder sportbike, so maintaining the FZ1 is much like other motorcycles of its class, like the Honda CBR900 919 or the Kawasaki Z1000.

Aside from the usual motorcycle maintenance tools, you'll need the following parts to maintain the FZ1.

Yamalube yamaha engine oil — Yamaha FZ1 2nd gen maintenance parts

K&N oil filter — Yamaha FZ1 2nd gen maintenance parts

Part/consumable	Image	Yamaha FZ1 2nd gen maintenance parts
Engine oil		Yamaha recommends using their own motor oil, which is affordable and good. Yamalube 10W-40 covers a huge range of operating temperatures, from below freezing to above 100 degrees F / 40 degrees C. Or use a high-grade synthetic like Motul 7100 10W-40.
Oil filter		Replace every 2nd oil change. Many 3rd gen R1 owners use Hiflofiltro filter HF204RC for easy replacement (you can use a normal wrench).
Brake fluid		Use Castrol DOT 4 which meets the spec.
Spark plugs		You need four spark plugs for the FZ1, NGK CR9EK for this gen.
Air filter		Use K&N air filter YA-1006 for this gen Yamaha FZ1.
Chain lubricant		A really popular chain lubricant that's low-mess and highly effective is Motul chain paste.
Coolant		Yamaha motorcycles use ethylene-glycol anti-freeze with corrosion-prevention properties that are silicate and borate free. One of the best deals on Amazon is Honda Coolant (yes it works in any bike!) — it's long-life, high-quality, and well-loved.
Cable lubricant		Keeping good clutch action depends on having a well-lubricated chain. You can use engine oil, but Protect All Cable Life is an affordable and well-used staple of maintenance.
Mechanical grease		It's important to grease moving parts, like the sidestand and sometimes bearings, to keep them from getting notchy or seizing. Valvoline moly-fortified grease meets a lot of needs.

Yamaha FZ1 2nd gen Maintenance Schedule

Below is the maintenance schedule for the Yamaha FZ1.

The maintenance schedule for the US version is slightly different to the Europe version. Previously these were combined in one table, but they are now separate below. The US one is in miles, and the Europe one is in km. The maintenance intervals are wider in the Europe manuals for Yamaha.

Notes on the maintenance schedule:

From the end of the maintenance schedule, continue in the pattern shown.
Don't clean the air filter with compressed air — it may get damaged. The air filter is a disposable oil-coated paper element.

FZ1 (USA) maintenance schedule

miles x 1000	4	8	12	16	20
Months	6	12	18	24	30	Every
Change oil (Yamalube 10W-40, Motul 7100 10W-40) with engine warm	•	•	•	•	•
Replace oil filter (HF204RC)		•		•
* Check spark plug condition. Adjust gap and clean. * Replace (R) periodically (NGK CR9EK)	•	R	•	R	•
Replace air filter (YA-1006)						24K mi. More often if riding in dust/wet.
Check and adjust engine idle speed and synchronization	•	•	•	•	•
Check and adjust valve clearance						26.6k mi
* Check drive chain slack, alignment and condition. * Adjust and lubricate chain (with e.g. Motul chain paste).						500 mi
Check front brake operation, fluid level, and for fluid leakage. Replace brake pads if necessary.	•	•	•	•	•
Check rear brake operation, fluid level, and for fluid leakage. Replace brake pads if necessary.	•	•	•	•	•
Check brake hoses for cracks, damage, correct routing, and clamping.	•	•	•	•	•
Replace brake fluid (Castrol DOT 4) and internal components of brake master cylinder						2 years
Replace brake hoses						4 years
Check cooling system hoses for cracks or damage. Replace if necessary.	•	•	•	•	•
Change coolant (Honda Coolant … yes, even for a Yamaha)				•		2 years
Check clutch operation. Adjust clutch cable — replace if necessary.	•	•	•	•	•
* Check operation of throttle, free play, and adjust if necessary. * Lubricate the throttle grip housing and cable (Protect all cable life)	•	•	•	•	•
Lubricant control cables thoroughly (Protect all cable life)	•	•	•	•	•
Lubricate brake lever pivot with silicone grease lightly	•	•	•	•	•
Lubricate brake pedal, clutch lever, and shift pedal with lithium soap-based grease lightly.	•	•	•	•	•
Check fuel hoses for cracks or damage. Replace if necessary	•	•	•	•	•
* Check tire tread depth and for damage. Replace if necessary. * Check tire air pressure, and adjust if necessary.	•	•	•	•	•
Check wheel runout and for damage. Replace if necessary.	•	•	•	•	•
Check wheel bearings for smooth operation. Replace if necessary.	•	•	•	•	•
Check swingarm pivot bearing assemblies for looseness.	•	•	•	•	•
Check steering bearing bearing assemblies for looseness.	•	•	•	•	•
Repack steering bearings with lithium soap-based grease.						12K mi
Check front fork absorber operation and for oil leakage. Replace if necessary.	•	•	•	•	•
Check shock absorber operation and for oil leakage. Replace if necessary.	•	•	•	•	•
Check rear suspension link pivot operation. Correct if necessary.		•		•
Check centrestand/side stand operation. Lubricate with lithium soap-based grease lightly.	•	•	•	•	•
Check sidestand switch operation and replace if necessary.	•	•	•	•	•
Check all chassis fitting and fasteners. Tighten/replace if necessary.	•	•	•	•	•
Check front and rear brake switch operation	•	•	•	•	•
Check evap control system for damage. Replace if necessary			•		•
Check exhaust system for leakage. Tighten, and replace gaskets if necessary.	•	•	•	•	•
Check the air induction cut-off valve and reed valve, and hose for damage. Replace damaged parts.		•		•
Check crankcase breather hose for cracks or damage. Replace if necessary	•	•	•	•	•
* Check operation of lights, signals, and switches. * Adjust headlight beam	•	•	•	•	•

Yamaha FZ1 2nd gen maintenance schedule

FZ1 (Europe) maintenance schedule

km x 1000	10	20	30	40	Every
Change oil (Yamalube 10W-40, Motul 7100 10W-40) with engine warm	•	•	•	•	Year
Replace oil filter (HF204RC)		•		•
* Check spark plug condition. Adjust gap and clean. * Replace (R) periodically (NGK CR9EK)	•	R	•	R
Replace air filter (YA-1006)				•	More often if riding in dust/wet.
Check and adjust engine idle speed and synchronization	•	•	•	•	Year
Check and adjust valve clearance				•	40K km
* Check drive chain slack, alignment and condition. * Adjust and lubricate chain (with e.g. Motul chain paste).					1000 km
Check front brake operation, fluid level, and for fluid leakage. Replace brake pads if necessary.	•	•	•	•	Year
Check rear brake operation, fluid level, and for fluid leakage. Replace brake pads if necessary.	•	•	•	•	Year
Check brake hoses for cracks, damage, correct routing, and clamping.	•	•	•	•	Year
Replace brake fluid (Castrol DOT 4) and internal components of brake master cylinder					2 years
Replace brake hoses
Check cooling system hoses for cracks or damage. Replace if necessary.	•	•	•	•	4 years
Change coolant (Honda Coolant … yes, even for a Yamaha)				•	3 years
Check clutch operation. Adjust clutch cable — replace if necessary.	•	•	•	•
* Check operation of throttle, free play, and adjust if necessary. * Lubricate the throttle grip housing and cable (Protect all cable life)	•	•	•	•
Lubricant control cables thoroughly (Protect all cable life)	•	•	•	•	Year
Lubricate brake lever pivot with silicone grease lightly	•	•	•	•	Year
Lubricate brake pedal, clutch lever, and shift pedal with lithium soap-based grease lightly.	•	•	•	•	Year
Check fuel hoses for cracks or damage. Replace if necessary	•	•	•	•	Year
* Check tire tread depth and for damage. Replace if necessary. * Check tire air pressure, and adjust if necessary.	•	•	•	•	Year
Check wheel runout and for damage. Replace if necessary.	•	•	•	•
Check wheel bearings for smooth operation. Replace if necessary.	•	•	•	•
Check swingarm pivot bearing assemblies for looseness.	•	•	•	•
Check steering bearing bearing assemblies for looseness.	•	•	•	•
Repack steering bearings with lithium soap-based grease.		•		•
Check front fork absorber operation and for oil leakage. Replace if necessary.	•	•	•	•
Check shock absorber operation and for oil leakage. Replace if necessary.	•	•	•	•
Check rear suspension link pivot operation. Correct if necessary.		•		•
Check centrestand/side stand operation. Lubricate with lithium soap-based grease lightly.	•	•	•	•	Year
Check sidestand switch operation and replace if necessary.	•	•	•	•	Year
Check all chassis fitting and fasteners. Tighten/replace if necessary.	•	•	•	•	Year
Check front and rear brake switch operation	•	•	•	•	Year
Check evap control system for damage. Replace if necessary			•
Check exhaust system for leakage. Tighten, and replace gaskets if necessary.	•	•	•	•
Check the air induction cut-off valve and reed valve, and hose for damage. Replace damaged parts.		•		•
Check crankcase breather hose for cracks or damage. Replace if necessary	•	•	•	•
* Check operation of lights, signals, and switches. * Adjust headlight beam	•	•	•	•

Yamaha FZ1 2nd gen — Europe maintenance schedule

About the Yamaha FZ1 2nd gen

Practical and comfortable, yet agile and fast, the Yamaha FZ1 2nd gen is ready for fun every time you fire it up.

It was a huge update from the 1st gen FZ1, getting a fuel-injected engine. It's still a liquid-cooled inline 4-cylinder DOHC engine, this one a 20-valve one, displacing 998cc.

Even though the MT-10 is the bike to get these days, don't forget that the humble FZ1 made 108 kW (148 hp) @ 11,000 rpm, and 106 Nm (78 ft-lb) @ 8,000 rpm… this is performance that's not unlike the K5 GSX-R1000. In other words, it's massive.

The Yamaha FZ1 2nd gen weighs only 221 kg (487 lb) soaking wet, so with that much torque and power, it makes for a real hooligan machine.

The bike is built on a cast aluminum frame that uses the engine as a stressed member, thus improving the overall rigidity, keeping the weight at a low level and improving the handling.

As far as suspension is concerned, the Yamaha FZ1 has fully adjustable 43 mm inverted forks and rear single shock with adjustable preload and rebound damping. It's very competent, especially given that this is a commuter/touring bike.